###################### Packetbeat Configuration Example #######################

# This file is a full configuration example documenting all non-deprecated
# options in comments. For a shorter configuration example, that contains only
# the most common options, please see packetbeat.yml in the same directory.
#
# You can find the full configuration reference here:
# https://www.elastic.co/guide/en/beats/packetbeat/index.html

#============================== Network device ================================

# Select the network interface to sniff the data. You can use the "any"
# keyword to sniff on all connected interfaces.
packetbeat.interfaces.device: 0

# Packetbeat supports three sniffer types:
# * pcap, which uses the libpcap library and works on most platforms, but it's
# not the fastest option.
# * af_packet, which uses memory-mapped sniffing. This option is faster than
# libpcap and doesn't require a kernel module, but it's Linux-specific.
#packetbeat.interfaces.type: pcap

# The maximum size of the packets to capture. The default is 65535, which is
# large enough for almost all networks and interface types. If you sniff on a
# physical network interface, the optimal setting is the MTU size. On virtual
# interfaces, however, it's safer to accept the default value.
#packetbeat.interfaces.snaplen: 65535

# The maximum size of the shared memory buffer to use between the kernel and
# user space. A bigger buffer usually results in lower CPU usage, but consumes
# more memory. This setting is only available for the af_packet sniffer type.
# The default is 30 MB.
#packetbeat.interfaces.buffer_size_mb: 30

# Packetbeat automatically generates a BPF for capturing only the traffic on
# ports where it expects to find known protocols. Use this settings to tell
# Packetbeat to generate a BPF filter that accepts VLAN tags.
#packetbeat.interfaces.with_vlans: true

# Use this setting to override the automatically generated BPF filter.
#packetbeat.interfaces.bpf_filter:

#================================== Flows =====================================

packetbeat.flows:
  # Enable Network flows. Default: true
  #enabled: true

  # Set network flow timeout. Flow is killed if no packet is received before being
  # timed out.
  timeout: 30s

  # Configure reporting period. If set to -1, only killed flows will be reported
  period: 10s

#========================== Transaction protocols =============================

packetbeat.protocols:
- type: icmp
  # Enable ICMPv4 and ICMPv6 monitoring. Default: true
  #enabled: true

- type: amqp
  # Enable AMQP monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for AMQP traffic. You can disable
  # the AMQP protocol by commenting out the list of ports.
  ports: [5672]
  # Truncate messages that are published and avoid huge messages being
  # indexed.
  # Default: 1000
  #max_body_length: 1000

  # Hide the header fields in header frames.
  # Default: false
  #parse_headers: false

  # Hide the additional arguments of method frames.
  # Default: false
  #parse_arguments: false

  # Hide all methods relative to connection negotiation between server and
  # client.
  # Default: true
  #hide_connection_information: true

  # If this option is enabled, the raw message of the request (`request` field)
  # is sent to Elasticsearch. The default is false.
  #send_request: false

  # If this option is enabled, the raw message of the response (`response`
  # field) is sent to Elasticsearch. The default is false.
  #send_response: false

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

- type: cassandra
  #Cassandra port for traffic monitoring.
  ports: [9042]

  # If this option is enabled, the raw message of the request (`cassandra_request` field)
  # is included in published events. The default is true.
  #send_request: true

  # If this option is enabled, the raw message of the response (`cassandra_request.request_headers` field)
  # is included in published events. The default is true. enable `send_request` first before enable this option.
  #send_request_header: true

  # If this option is enabled, the raw message of the response (`cassandra_response` field)
  # is included in published events. The default is true.
  #send_response: true

  # If this option is enabled, the raw message of the response (`cassandra_response.response_headers` field)
  # is included in published events. The default is true. enable `send_response` first before enable this option.
  #send_response_header: true

  # Configures the default compression algorithm being used to uncompress compressed frames by name. Currently only `snappy` is can be configured.
  # By default no compressor is configured.
  #compressor: "snappy"

  # This option indicates which Operator/Operators will be ignored.
  #ignored_ops: ["SUPPORTED","OPTIONS"]

- type: dns
  # Enable DNS monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for DNS traffic. You can disable
  # the DNS protocol by commenting out the list of ports.
  ports: [53]

  # include_authorities controls whether or not the dns.authorities field
  # (authority resource records) is added to messages.
  # Default: false
  include_authorities: true
  # include_additionals controls whether or not the dns.additionals field
  # (additional resource records) is added to messages.
  # Default: false
  include_additionals: true

  # send_request and send_response control whether or not the stringified DNS
  # request and response message are added to the result.
  # Nearly all data about the request/response is available in the dns.*
  # fields, but this can be useful if you need visibility specifically
  # into the request or the response.
  # Default: false
  # send_request:  true
  # send_response: true

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

- type: http
  # Enable HTTP monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for HTTP traffic. You can disable
  # the HTTP protocol by commenting out the list of ports.
  ports: [80, 8080, 8000, 5000, 8002]

  # Uncomment the following to hide certain parameters in URL or forms attached
  # to HTTP requests. The names of the parameters are case insensitive.
  # The value of the parameters will be replaced with the 'xxxxx' string.
  # This is generally useful for avoiding storing user passwords or other
  # sensitive information.
  # Only query parameters and top level form parameters are replaced.
  # hide_keywords: ['pass', 'password', 'passwd']

  # A list of header names to capture and send to Elasticsearch. These headers
  # are placed under the `headers` dictionary in the resulting JSON.
  #send_headers: false

  # Instead of sending a white list of headers to Elasticsearch, you can send
  # all headers by setting this option to true. The default is false.
  #send_all_headers: false

  # The list of content types for which Packetbeat includes the full HTTP
  # payload. If the request's or response's Content-Type matches any on this
  # list, the full body will be included under the request or response field.
  #include_body_for: []

  # The list of content types for which Packetbeat includes the full HTTP
  # request payload.
  #include_request_body_for: []

  # The list of content types for which Packetbeat includes the full HTTP
  # response payload.
  #include_response_body_for: []

  # If the Cookie or Set-Cookie headers are sent, this option controls whether
  # they are split into individual values.
  #split_cookie: false

  # The header field to extract the real IP from. This setting is useful when
  # you want to capture traffic behind a reverse proxy, but you want to get the
  # geo-location information.
  #real_ip_header:

  # If this option is enabled, the raw message of the request (`request` field)
  # is sent to Elasticsearch. The default is false.
  #send_request: false

  # If this option is enabled, the raw message of the response (`response`
  # field) is sent to Elasticsearch. The default is false.
  #send_response: false

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

  # Maximum message size. If an HTTP message is larger than this, it will
  # be trimmed to this size. Default is 10 MB.
  #max_message_size: 10485760

- type: memcache
  # Enable memcache monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for memcache traffic. You can disable
  # the Memcache protocol by commenting out the list of ports.
  ports: [11211]

  # Uncomment the parseunknown option to force the memcache text protocol parser
  # to accept unknown commands.
  # Note: All unknown commands MUST not contain any data parts!
  # Default: false
  # parseunknown: true

  # Update the maxvalue option to store the values - base64 encoded - in the
  # json output.
  # possible values:
  #    maxvalue: -1  # store all values (text based protocol multi-get)
  #    maxvalue: 0   # store no values at all
  #    maxvalue: N   # store up to N values
  # Default: 0
  # maxvalues: -1

  # Use maxbytespervalue to limit the number of bytes to be copied per value element.
  # Note: Values will be base64 encoded, so actual size in json document
  #       will be 4 times maxbytespervalue.
  # Default: unlimited
  # maxbytespervalue: 100

  # UDP transaction timeout in milliseconds.
  # Note: Quiet messages in UDP binary protocol will get response only in error case.
  #       The memcached analyzer will wait for udptransactiontimeout milliseconds
  #       before publishing quiet messages. Non quiet messages or quiet requests with
  #       error response will not have to wait for the timeout.
  # Default: 200
  # udptransactiontimeout: 1000

  # If this option is enabled, the raw message of the request (`request` field)
  # is sent to Elasticsearch. The default is false.
  #send_request: false

  # If this option is enabled, the raw message of the response (`response`
  # field) is sent to Elasticsearch. The default is false.
  #send_response: false

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

- type: mysql
  # Enable mysql monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for MySQL traffic. You can disable
  # the MySQL protocol by commenting out the list of ports.
  ports: [3306]

  # If this option is enabled, the raw message of the request (`request` field)
  # is sent to Elasticsearch. The default is false.
  #send_request: false

  # If this option is enabled, the raw message of the response (`response`
  # field) is sent to Elasticsearch. The default is false.
  #send_response: false

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

- type: pgsql
  # Enable pgsql monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for Pgsql traffic. You can disable
  # the Pgsql protocol by commenting out the list of ports.
  ports: [5432]

  # If this option is enabled, the raw message of the request (`request` field)
  # is sent to Elasticsearch. The default is false.
  #send_request: false

  # If this option is enabled, the raw message of the response (`response`
  # field) is sent to Elasticsearch. The default is false.
  #send_response: false

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

- type: redis
  # Enable redis monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for Redis traffic. You can disable
  # the Redis protocol by commenting out the list of ports.
  ports: [6379]

  # If this option is enabled, the raw message of the request (`request` field)
  # is sent to Elasticsearch. The default is false.
  #send_request: false

  # If this option is enabled, the raw message of the response (`response`
  # field) is sent to Elasticsearch. The default is false.
  #send_response: false

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

- type: thrift
  # Enable thrift monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for Thrift-RPC traffic. You can disable
  # the Thrift-RPC protocol by commenting out the list of ports.
  ports: [9090]

  # The Thrift transport type. Currently this option accepts the values socket
  # for TSocket, which is the default Thrift transport, and framed for the
  # TFramed Thrift transport. The default is socket.
  #transport_type: socket

  # The Thrift protocol type. Currently the only accepted value is binary for
  # the TBinary protocol, which is the default Thrift protocol.
  #protocol_type: binary

  # The Thrift interface description language (IDL) files for the service that
  # Packetbeat is monitoring.  Providing the IDL enables Packetbeat to include
  # parameter and exception names.
  #idl_files: []

  # The maximum length for strings in parameters or return values. If a string
  # is longer than this value, the string is automatically truncated to this
  # length.
  #string_max_size: 200

  # The maximum number of elements in a Thrift list, set, map, or structure.
  #collection_max_size: 15

  # If this option is set to false, Packetbeat decodes the method name from the
  # reply and simply skips the rest of the response message.
  #capture_reply: true

  # If this option is set to true, Packetbeat replaces all strings found in
  # method parameters, return codes, or exception structures with the "*"
  # string.
  #obfuscate_strings: false

  # The maximum number of fields that a structure can have before Packetbeat
  # ignores the whole transaction.
  #drop_after_n_struct_fields: 500

  # If this option is enabled, the raw message of the request (`request` field)
  # is sent to Elasticsearch. The default is false.
  #send_request: false

  # If this option is enabled, the raw message of the response (`response`
  # field) is sent to Elasticsearch. The default is false.
  #send_response: false

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

- type: mongodb
  # Enable mongodb monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for MongoDB traffic. You can disable
  # the MongoDB protocol by commenting out the list of ports.
  ports: [27017]


  # The maximum number of documents from the response to index in the `response`
  # field. The default is 10.
  #max_docs: 10

  # The maximum number of characters in a single document indexed in the
  # `response` field. The default is 5000. You can set this to 0 to index an
  # unlimited number of characters per document.
  #max_doc_length: 5000

  # If this option is enabled, the raw message of the request (`request` field)
  # is sent to Elasticsearch. The default is false.
  #send_request: false

  # If this option is enabled, the raw message of the response (`response`
  # field) is sent to Elasticsearch. The default is false.
  #send_response: false

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

- type: nfs
  # Enable NFS monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for NFS traffic. You can disable
  # the NFS protocol by commenting out the list of ports.
  ports: [2049]

  # If this option is enabled, the raw message of the request (`request` field)
  # is sent to Elasticsearch. The default is false.
  #send_request: false

  # If this option is enabled, the raw message of the response (`response`
  # field) is sent to Elasticsearch. The default is false.
  #send_response: false

  # Transaction timeout. Expired transactions will no longer be correlated to
  # incoming responses, but sent to Elasticsearch immediately.
  #transaction_timeout: 10s

- type: tls
  # Enable TLS monitoring. Default: true
  #enabled: true

  # Configure the ports where to listen for TLS traffic. You can disable
  # the TLS protocol by commenting out the list of ports.
  ports: [443]

  # If this option is enabled, the client and server certificates and
  # certificate chains are sent to Elasticsearch. The default is true.
  #send_certificates: true

  # If this option is enabled, the raw certificates will be stored
  # in PEM format under the `raw` key. The default is false.
  #include_raw_certificates: false

#=========================== Monitored processes ==============================

# Configure the processes to be monitored and how to find them. If a process is
# monitored then Packetbeat attempts to use it's name to fill in the `proc` and
# `client_proc` fields.
# The processes can be found by searching their command line by a given string.
#
# Process matching is optional and can be enabled by uncommenting the following
# lines.
#
#packetbeat.procs:
#  enabled: false
#  monitored:
#    - process: mysqld
#      cmdline_grep: mysqld
#
#    - process: pgsql
#      cmdline_grep: postgres
#
#    - process: nginx
#      cmdline_grep: nginx
#
#    - process: app
#      cmdline_grep: gunicorn

# Uncomment the following if you want to ignore transactions created
# by the server on which the shipper is installed. This option is useful
# to remove duplicates if shippers are installed on multiple servers.
#packetbeat.ignore_outgoing: true

#================================ General ======================================

# The name of the shipper that publishes the network data. It can be used to group
# all the transactions sent by a single shipper in the web interface.
# If this options is not defined, the hostname is used.
#name:

# The tags of the shipper are included in their own field with each
# transaction published. Tags make it easy to group servers by different
# logical properties.
#tags: ["service-X", "web-tier"]

# Optional fields that you can specify to add additional information to the
# output. Fields can be scalar values, arrays, dictionaries, or any nested
# combination of these.
#fields:
#  env: staging

# If this option is set to true, the custom fields are stored as top-level
# fields in the output document instead of being grouped under a fields
# sub-dictionary. Default is false.
#fields_under_root: false

# Internal queue configuration for buffering events to be published.
#queue:
  # Queue type by name (default 'mem')
  # The memory queue will present all available events (up to the outputs
  # bulk_max_size) to the output, the moment the output is ready to server
  # another batch of events.
  #mem:
    # Max number of events the queue can buffer.
    #events: 4096

    # Hints the minimum number of events stored in the queue,
    # before providing a batch of events to the outputs.
    # The default value is set to 2048.
    # A value of 0 ensures events are immediately available
    # to be sent to the outputs.
    #flush.min_events: 2048

    # Maximum duration after which events are available to the outputs,
    # if the number of events stored in the queue is < min_flush_events.
    #flush.timeout: 1s

  # The spool queue will store events in a local spool file, before
  # forwarding the events to the outputs.
  #
  # Beta: spooling to disk is currently a beta feature. Use with care.
  #
  # The spool file is a circular buffer, which blocks once the file/buffer is full.
  # Events are put into a write buffer and flushed once the write buffer
  # is full or the flush_timeout is triggered.
  # Once ACKed by the output, events are removed immediately from the queue,
  # making space for new events to be persisted.
  #spool:
    # The file namespace configures the file path and the file creation settings.
    # Once the file exists, the `size`, `page_size` and `prealloc` settings
    # will have no more effect.
    #file:
      # Location of spool file. The default value is ${path.data}/spool.dat.
      #path: "${path.data}/spool.dat"

      # Configure file permissions if file is created. The default value is 0600.
      #permissions: 0600

      # File size hint. The spool blocks, once this limit is reached. The default value is 100 MiB.
      #size: 100MiB

      # The files page size. A file is split into multiple pages of the same size. The default value is 4KiB.
      #page_size: 4KiB

      # If prealloc is set, the required space for the file is reserved using
      # truncate. The default value is true.
      #prealloc: true

    # Spool writer settings
    # Events are serialized into a write buffer. The write buffer is flushed if:
    # - The buffer limit has been reached.
    # - The configured limit of buffered events is reached.
    # - The flush timeout is triggered.
    #write:
      # Sets the write buffer size.
      #buffer_size: 1MiB

      # Maximum duration after which events are flushed, if the write buffer
      # is not full yet. The default value is 1s.
      #flush.timeout: 1s

      # Number of maximum buffered events. The write buffer is flushed once the
      # limit is reached.
      #flush.events: 16384

      # Configure the on-disk event encoding. The encoding can be changed
      # between restarts.
      # Valid encodings are: json, ubjson, and cbor.
      #codec: cbor
    #read:
      # Reader flush timeout, waiting for more events to become available, so
      # to fill a complete batch, as required by the outputs.
      # If flush_timeout is 0, all available events are forwarded to the
      # outputs immediately.
      # The default value is 0s.
      #flush.timeout: 0s

# Sets the maximum number of CPUs that can be executing simultaneously. The
# default is the number of logical CPUs available in the system.
#max_procs:

#================================ Processors ===================================

# Processors are used to reduce the number of fields in the exported event or to
# enhance the event with external metadata. This section defines a list of
# processors that are applied one by one and the first one receives the initial
# event:
#
#   event -> filter1 -> event1 -> filter2 ->event2 ...
#
# The supported processors are drop_fields, drop_event, include_fields, and
# add_cloud_metadata.
#
# For example, you can use the following processors to keep the fields that
# contain CPU load percentages, but remove the fields that contain CPU ticks
# values:
#
#processors:
#- include_fields:
#    fields: ["cpu"]
#- drop_fields:
#    fields: ["cpu.user", "cpu.system"]
#
# The following example drops the events that have the HTTP response code 200:
#
#processors:
#- drop_event:
#    when:
#       equals:
#           http.code: 200
#
# The following example renames the field a to b:
#
#processors:
#- rename:
#    fields:
#       - from: "a"
#         to: "b"
#
# The following example enriches each event with metadata from the cloud
# provider about the host machine. It works on EC2, GCE, DigitalOcean,
# Tencent Cloud, and Alibaba Cloud.
#
#processors:
#- add_cloud_metadata: ~
#
# The following example enriches each event with the machine's local time zone
# offset from UTC.
#
#processors:
#- add_locale:
#    format: offset
#
# The following example enriches each event with docker metadata, it matches
# given fields to an existing container id and adds info from that container:
#
#processors:
#- add_docker_metadata:
#    host: "unix:///var/run/docker.sock"
#    match_fields: ["system.process.cgroup.id"]
#    match_pids: ["process.pid", "process.ppid"]
#    match_source: true
#    match_source_index: 4
#    match_short_id: false
#    cleanup_timeout: 60
#    # To connect to Docker over TLS you must specify a client and CA certificate.
#    #ssl:
#    #  certificate_authority: "/etc/pki/root/ca.pem"
#    #  certificate:           "/etc/pki/client/cert.pem"
#    #  key:                   "/etc/pki/client/cert.key"
#
# The following example enriches each event with docker metadata, it matches
# container id from log path available in `source` field (by default it expects
# it to be /var/lib/docker/containers/*/*.log).
#
#processors:
#- add_docker_metadata: ~
#- add_host_metadata: ~

#============================= Elastic Cloud ==================================

# These settings simplify using packetbeat with the Elastic Cloud (https://cloud.elastic.co/).

# The cloud.id setting overwrites the `output.elasticsearch.hosts` and
# `setup.kibana.host` options.
# You can find the `cloud.id` in the Elastic Cloud web UI.
#cloud.id:

# The cloud.auth setting overwrites the `output.elasticsearch.username` and
# `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
#cloud.auth:

#================================ Outputs ======================================

# Configure what output to use when sending the data collected by the beat.

#-------------------------- Elasticsearch output -------------------------------
output.elasticsearch:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Array of hosts to connect to.
  # Scheme and port can be left out and will be set to the default (http and 9200)
  # In case you specify and additional path, the scheme is required: http://localhost:9200/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
  hosts: ["localhost:9200"]

  # Set gzip compression level.
  #compression_level: 0

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

  # Dictionary of HTTP parameters to pass within the url with index operations.
  #parameters:
    #param1: value1
    #param2: value2

  # Number of workers per Elasticsearch host.
  #worker: 1

  # Optional index name. The default is "packetbeat" plus date
  # and generates [packetbeat-]YYYY.MM.DD keys.
  # In case you modify this pattern you must update setup.template.name and setup.template.pattern accordingly.
  #index: "packetbeat-%{[beat.version]}-%{+yyyy.MM.dd}"

  # Optional ingest node pipeline. By default no pipeline will be used.
  #pipeline: ""

  # Optional HTTP Path
  #path: "/elasticsearch"

  # Custom HTTP headers to add to each request
  #headers:
  #  X-My-Header: Contents of the header

  # Proxy server url
  #proxy_url: http://proxy:3128

  # The number of times a particular Elasticsearch index operation is attempted. If
  # the indexing operation doesn't succeed after this many retries, the events are
  # dropped. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
  # The default is 50.
  #bulk_max_size: 50

  # The number of seconds to wait before trying to reconnect to Elasticsearch
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Elasticsearch after a network error. The default is 60s.
  #backoff.max: 60s

  # Configure http request timeout before failing a request to Elasticsearch.
  #timeout: 90

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # SSL configuration. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never


#----------------------------- Logstash output ---------------------------------
#output.logstash:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # The Logstash hosts
  #hosts: ["localhost:5044"]

  # Number of workers per Logstash host.
  #worker: 1

  # Set gzip compression level.
  #compression_level: 3

  # Optional maximum time to live for a connection to Logstash, after which the
  # connection will be re-established.  A value of `0s` (the default) will
  # disable this feature.
  #
  # Not yet supported for async connections (i.e. with the "pipelining" option set)
  #ttl: 30s

  # Optional load balance the events between the Logstash hosts. Default is false.
  #loadbalance: false

  # Number of batches to be sent asynchronously to Logstash while processing
  # new batches.
  #pipelining: 2

  # If enabled only a subset of events in a batch of events is transferred per
  # transaction.  The number of events to be sent increases up to `bulk_max_size`
  # if no error is encountered.
  #slow_start: false

  # The number of seconds to wait before trying to reconnect to Logstash
  # after a network error. After waiting backoff.init seconds, the Beat
  # tries to reconnect. If the attempt fails, the backoff timer is increased
  # exponentially up to backoff.max. After a successful connection, the backoff
  # timer is reset. The default is 1s.
  #backoff.init: 1s

  # The maximum number of seconds to wait before attempting to connect to
  # Logstash after a network error. The default is 60s.
  #backoff.max: 60s

  # Optional index name. The default index name is set to packetbeat
  # in all lowercase.
  #index: 'packetbeat'

  # SOCKS5 proxy server URL
  #proxy_url: socks5://user:password@socks5-server:2233

  # Resolve names locally when using a proxy server. Defaults to false.
  #proxy_use_local_resolver: false

  # Enable SSL support. SSL is automatically enabled, if any SSL setting is set.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # Optional SSL configuration options. SSL is off by default.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

#------------------------------- Kafka output ----------------------------------
#output.kafka:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # The list of Kafka broker addresses from where to fetch the cluster metadata.
  # The cluster metadata contain the actual Kafka brokers events are published
  # to.
  #hosts: ["localhost:9092"]

  # The Kafka topic used for produced events. The setting can be a format string
  # using any event field. To set the topic from document type use `%{[type]}`.
  #topic: beats

  # The Kafka event key setting. Use format string to create unique event key.
  # By default no event key will be generated.
  #key: ''

  # The Kafka event partitioning strategy. Default hashing strategy is `hash`
  # using the `output.kafka.key` setting or randomly distributes events if
  # `output.kafka.key` is not configured.
  #partition.hash:
    # If enabled, events will only be published to partitions with reachable
    # leaders. Default is false.
    #reachable_only: false

    # Configure alternative event field names used to compute the hash value.
    # If empty `output.kafka.key` setting will be used.
    # Default value is empty list.
    #hash: []

  # Authentication details. Password is required if username is set.
  #username: ''
  #password: ''

  # Kafka version packetbeat is assumed to run against. Defaults to the oldest
  # supported stable version (currently version 0.8.2.0)
  #version: 0.8.2

  # Metadata update configuration. Metadata do contain leader information
  # deciding which broker to use when publishing.
  #metadata:
    # Max metadata request retry attempts when cluster is in middle of leader
    # election. Defaults to 3 retries.
    #retry.max: 3

    # Waiting time between retries during leader elections. Default is 250ms.
    #retry.backoff: 250ms

    # Refresh metadata interval. Defaults to every 10 minutes.
    #refresh_frequency: 10m

  # The number of concurrent load-balanced Kafka output workers.
  #worker: 1

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat, ignore the max_retries setting and retry until
  # all events are published.  Set max_retries to a value less than 0 to retry
  # until all events are published. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Kafka request. The default
  # is 2048.
  #bulk_max_size: 2048

  # The number of seconds to wait for responses from the Kafka brokers before
  # timing out. The default is 30s.
  #timeout: 30s

  # The maximum duration a broker will wait for number of required ACKs. The
  # default is 10s.
  #broker_timeout: 10s

  # The number of messages buffered for each Kafka broker. The default is 256.
  #channel_buffer_size: 256

  # The keep-alive period for an active network connection. If 0s, keep-alives
  # are disabled. The default is 0 seconds.
  #keep_alive: 0

  # Sets the output compression codec. Must be one of none, snappy and gzip. The
  # default is gzip.
  #compression: gzip

  # The maximum permitted size of JSON-encoded messages. Bigger messages will be
  # dropped. The default value is 1000000 (bytes). This value should be equal to
  # or less than the broker's message.max.bytes.
  #max_message_bytes: 1000000

  # The ACK reliability level required from broker. 0=no response, 1=wait for
  # local commit, -1=wait for all replicas to commit. The default is 1.  Note:
  # If set to 0, no ACKs are returned by Kafka. Messages might be lost silently
  # on error.
  #required_acks: 1

  # The configurable ClientID used for logging, debugging, and auditing
  # purposes.  The default is "beats".
  #client_id: beats

  # Enable SSL support. SSL is automatically enabled, if any SSL setting is set.
  #ssl.enabled: true

  # Optional SSL configuration options. SSL is off by default.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

#------------------------------- Redis output ----------------------------------
#output.redis:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # The list of Redis servers to connect to. If load balancing is enabled, the
  # events are distributed to the servers in the list. If one server becomes
  # unreachable, the events are distributed to the reachable servers only.
  #hosts: ["localhost:6379"]

  # The Redis port to use if hosts does not contain a port number. The default
  # is 6379.
  #port: 6379

  # The name of the Redis list or channel the events are published to. The
  # default is packetbeat.
  #key: packetbeat

  # The password to authenticate with. The default is no authentication.
  #password:

  # The Redis database number where the events are published. The default is 0.
  #db: 0

  # The Redis data type to use for publishing events. If the data type is list,
  # the Redis RPUSH command is used. If the data type is channel, the Redis
  # PUBLISH command is used. The default value is list.
  #datatype: list

  # The number of workers to use for each host configured to publish events to
  # Redis. Use this setting along with the loadbalance option. For example, if
  # you have 2 hosts and 3 workers, in total 6 workers are started (3 for each
  # host).
  #worker: 1

  # If set to true and multiple hosts or workers are configured, the output
  # plugin load balances published events onto all Redis hosts. If set to false,
  # the output plugin sends all events to only one host (determined at random)
  # and will switch to another host if the currently selected one becomes
  # unreachable. The default value is true.
  #loadbalance: true

  # The Redis connection timeout in seconds. The default is 5 seconds.
  #timeout: 5s

  # The number of times to retry publishing an event after a publishing failure.
  # After the specified number of retries, the events are typically dropped.
  # Some Beats, such as Filebeat, ignore the max_retries setting and retry until
  # all events are published. Set max_retries to a value less than 0 to retry
  # until all events are published. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Redis request or pipeline.
  # The default is 2048.
  #bulk_max_size: 2048

  # The URL of the SOCKS5 proxy to use when connecting to the Redis servers. The
  # value must be a URL with a scheme of socks5://.
  #proxy_url:

  # This option determines whether Redis hostnames are resolved locally when
  # using a proxy. The default value is false, which means that name resolution
  # occurs on the proxy server.
  #proxy_use_local_resolver: false

  # Enable SSL support. SSL is automatically enabled, if any SSL setting is set.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # Optional SSL configuration options. SSL is off by default.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

#------------------------------- File output -----------------------------------
#output.file:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Path to the directory where to save the generated files. The option is
  # mandatory.
  #path: "/tmp/packetbeat"

  # Name of the generated files. The default is `packetbeat` and it generates
  # files: `packetbeat`, `packetbeat.1`, `packetbeat.2`, etc.
  #filename: packetbeat

  # Maximum size in kilobytes of each file. When this size is reached, and on
  # every packetbeat restart, the files are rotated. The default value is 10240
  # kB.
  #rotate_every_kb: 10000

  # Maximum number of files under path. When this number of files is reached,
  # the oldest file is deleted and the rest are shifted from last to first. The
  # default is 7 files.
  #number_of_files: 7

  # Permissions to use for file creation. The default is 0600.
  #permissions: 0600


#----------------------------- Console output ---------------------------------
#output.console:
  # Boolean flag to enable or disable the output module.
  #enabled: true

  # Pretty print json event
  #pretty: false

#================================= Paths ======================================

# The home path for the packetbeat installation. This is the default base path
# for all other path settings and for miscellaneous files that come with the
# distribution (for example, the sample dashboards).
# If not set by a CLI flag or in the configuration file, the default for the
# home path is the location of the binary.
#path.home:

# The configuration path for the packetbeat installation. This is the default
# base path for configuration files, including the main YAML configuration file
# and the Elasticsearch template file. If not set by a CLI flag or in the
# configuration file, the default for the configuration path is the home path.
#path.config: ${path.home}

# The data path for the packetbeat installation. This is the default base path
# for all the files in which packetbeat needs to store its data. If not set by a
# CLI flag or in the configuration file, the default for the data path is a data
# subdirectory inside the home path.
#path.data: ${path.home}/data

# The logs path for a packetbeat installation. This is the default location for
# the Beat's log files. If not set by a CLI flag or in the configuration file,
# the default for the logs path is a logs subdirectory inside the home path.
#path.logs: ${path.home}/logs

#================================ Keystore ==========================================
# Location of the Keystore containing the keys and their sensitive values.
#keystore.path: "${path.config}/beats.keystore"

#============================== Dashboards =====================================
# These settings control loading the sample dashboards to the Kibana index. Loading
# the dashboards are disabled by default and can be enabled either by setting the
# options here, or by using the `-setup` CLI flag or the `setup` command.
#setup.dashboards.enabled: false

# The directory from where to read the dashboards. The default is the `kibana`
# folder in the home path.
#setup.dashboards.directory: ${path.home}/kibana

# The URL from where to download the dashboards archive. It is used instead of
# the directory if it has a value.
#setup.dashboards.url:

# The file archive (zip file) from where to read the dashboards. It is used instead
# of the directory when it has a value.
#setup.dashboards.file:

# In case the archive contains the dashboards from multiple Beats, this lets you
# select which one to load. You can load all the dashboards in the archive by
# setting this to the empty string.
#setup.dashboards.beat: packetbeat

# The name of the Kibana index to use for setting the configuration. Default is ".kibana"
#setup.dashboards.kibana_index: .kibana

# The Elasticsearch index name. This overwrites the index name defined in the
# dashboards and index pattern. Example: testbeat-*
#setup.dashboards.index:

# Always use the Kibana API for loading the dashboards instead of autodetecting
# how to install the dashboards by first querying Elasticsearch.
#setup.dashboards.always_kibana: false

# If true and Kibana is not reachable at the time when dashboards are loaded,
# it will retry to reconnect to Kibana instead of exiting with an error.
#setup.dashboards.retry.enabled: false

# Duration interval between Kibana connection retries.
#setup.dashboards.retry.interval: 1s

# Maximum number of retries before exiting with an error, 0 for unlimited retrying.
#setup.dashboards.retry.maximum: 0


#============================== Template =====================================

# A template is used to set the mapping in Elasticsearch
# By default template loading is enabled and the template is loaded.
# These settings can be adjusted to load your own template or overwrite existing ones.

# Set to false to disable template loading.
#setup.template.enabled: true

# Template name. By default the template name is "packetbeat-%{[beat.version]}"
# The template name and pattern has to be set in case the elasticsearch index pattern is modified.
#setup.template.name: "packetbeat-%{[beat.version]}"

# Template pattern. By default the template pattern is "-%{[beat.version]}-*" to apply to the default index settings.
# The first part is the version of the beat and then -* is used to match all daily indices.
# The template name and pattern has to be set in case the elasticsearch index pattern is modified.
#setup.template.pattern: "packetbeat-%{[beat.version]}-*"

# Path to fields.yml file to generate the template
#setup.template.fields: "${path.config}/fields.yml"

# Overwrite existing template
#setup.template.overwrite: false

# Elasticsearch template settings
setup.template.settings:

  # A dictionary of settings to place into the settings.index dictionary
  # of the Elasticsearch template. For more details, please check
  # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping.html
  #index:
    #number_of_shards: 1
    #codec: best_compression
    #number_of_routing_shards: 30

  # A dictionary of settings for the _source field. For more details, please check
  # https://www.elastic.co/guide/en/elasticsearch/reference/current/mapping-source-field.html
  #_source:
    #enabled: false

#============================== Kibana =====================================

# Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
# This requires a Kibana endpoint configuration.
setup.kibana:

  # Kibana Host
  # Scheme and port can be left out and will be set to the default (http and 5601)
  # In case you specify and additional path, the scheme is required: http://localhost:5601/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
  #host: "localhost:5601"

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"

  # Optional HTTP Path
  #path: ""

  # Use SSL settings for HTTPS. Default is true.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # SSL configuration. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []



#================================ Logging ======================================
# There are four options for the log output: file, stderr, syslog, eventlog
# The file output is the default.

# Sets log level. The default log level is info.
# Available log levels are: error, warning, info, debug
#logging.level: info

# Enable debug output for selected components. To enable all selectors use ["*"]
# Other available selectors are "beat", "publish", "service"
# Multiple selectors can be chained.
#logging.selectors: [ ]

# Send all logging output to syslog. The default is false.
#logging.to_syslog: false

# Send all logging output to Windows Event Logs. The default is false.
#logging.to_eventlog: false

# If enabled, packetbeat periodically logs its internal metrics that have changed
# in the last period. For each metric that changed, the delta from the value at
# the beginning of the period is logged. Also, the total values for
# all non-zero internal metrics are logged on shutdown. The default is true.
#logging.metrics.enabled: true

# The period after which to log the internal metrics. The default is 30s.
#logging.metrics.period: 30s

# Logging to rotating files. Set logging.to_files to false to disable logging to
# files.
logging.to_files: true
logging.files:
  # Configure the path where the logs are written. The default is the logs directory
  # under the home path (the binary location).
  #path: /var/log/packetbeat

  # The name of the files where the logs are written to.
  #name: packetbeat

  # Configure log file size limit. If limit is reached, log file will be
  # automatically rotated
  #rotateeverybytes: 10485760 # = 10MB

  # Number of rotated log files to keep. Oldest files will be deleted first.
  #keepfiles: 7

  # The permissions mask to apply when rotating log files. The default value is 0600.
  # Must be a valid Unix-style file permissions mask expressed in octal notation.
  #permissions: 0600

# Set to true to log messages in json format.
#logging.json: false


#============================== Xpack Monitoring =====================================
# packetbeat can export internal metrics to a central Elasticsearch monitoring cluster.
# This requires xpack monitoring to be enabled in Elasticsearch.
# The reporting is disabled by default.

# Set to true to enable the monitoring reporter.
#xpack.monitoring.enabled: false

# Uncomment to send the metrics to Elasticsearch. Most settings from the
# Elasticsearch output are accepted here as well. Any setting that is not set is
# automatically inherited from the Elasticsearch output configuration, so if you
# have the Elasticsearch output configured, you can simply uncomment the
# following line, and leave the rest commented out.
#xpack.monitoring.elasticsearch:

  # Array of hosts to connect to.
  # Scheme and port can be left out and will be set to the default (http and 9200)
  # In case you specify and additional path, the scheme is required: http://localhost:9200/path
  # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
  #hosts: ["localhost:9200"]

  # Set gzip compression level.
  #compression_level: 0

  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "beats_system"
  #password: "changeme"

  # Dictionary of HTTP parameters to pass within the url with index operations.
  #parameters:
    #param1: value1
    #param2: value2

  # Custom HTTP headers to add to each request
  #headers:
  #  X-My-Header: Contents of the header

  # Proxy server url
  #proxy_url: http://proxy:3128

  # The number of times a particular Elasticsearch index operation is attempted. If
  # the indexing operation doesn't succeed after this many retries, the events are
  # dropped. The default is 3.
  #max_retries: 3

  # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
  # The default is 50.
  #bulk_max_size: 50

  # Configure http request timeout before failing an request to Elasticsearch.
  #timeout: 90

  # Use SSL settings for HTTPS.
  #ssl.enabled: true

  # Configure SSL verification mode. If `none` is configured, all server hosts
  # and certificates will be accepted. In this mode, SSL based connections are
  # susceptible to man-in-the-middle attacks. Use only for testing. Default is
  # `full`.
  #ssl.verification_mode: full

  # List of supported/valid TLS versions. By default all TLS versions 1.0 up to
  # 1.2 are enabled.
  #ssl.supported_protocols: [TLSv1.0, TLSv1.1, TLSv1.2]

  # SSL configuration. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

  # Optional passphrase for decrypting the Certificate Key.
  #ssl.key_passphrase: ''

  # Configure cipher suites to be used for SSL connections
  #ssl.cipher_suites: []

  # Configure curve types for ECDHE based cipher suites
  #ssl.curve_types: []

  # Configure what types of renegotiation are supported. Valid options are
  # never, once, and freely. Default is never.
  #ssl.renegotiation: never

#================================ HTTP Endpoint ======================================
# Each beat can expose internal metrics through a HTTP endpoint. For security
# reasons the endpoint is disabled by default. This feature is currently experimental.
# Stats can be access through http://localhost:5066/stats . For pretty JSON output
# append ?pretty to the URL.

# Defines if the HTTP endpoint is enabled.
#http.enabled: false

# The HTTP endpoint will bind to this hostname or IP address. It is recommended to use only localhost.
#http.host: localhost

# Port on which the HTTP endpoint will bind. Default is 5066.
#http.port: 5066
